Updated
5/27/2003 by TJK
EE130
(Spring
2003)
Integrated
Circuit Devices
TuTh
3:30PM5:00PM, 203 McLaughlin Hall
Webcast
 Handouts
 Lecture
Notes  Homework
 Project
 Exams
 Newsgroup
Instructor:
Prof. TsuJae King: (510) 6439251;
tking@eecs.berkeley.edu
Office hrs: Th 121PM; Fr 45PM; 567 Cory Hall
Teaching
Assistants:
Marie Eyoum:
meyoum@eecs.berkeley.edu
Discussion hr:
Section 101: We 45 PM, 203 McLaughlin
Office hr: Mo 56 PM; 179M Cory
Alvaro Padilla: apadilla@eecs.berkeley.edu
Discussion hr:
Section 102: Th 1011 AM, 105 Latimer
Office hr: We 34 PM; 179M Cory
Announcements:

Course grades are posted
here.
Errata:
Homework solutions:

HW#2, Problem 4c:
kT
= 2 x 0.026eV at T = 600K, so E_{F}E_{i}
= 0.006 eV

HW#3, Problem 2:
The
correct solution is available here.

HW#4, Problem 5:
The
numerical values used were slightly off. The correct solution is
posted here.

Note: N_{c}
= 3.22x10^{19} cm^{3} and N_{v} = 1.83x10^{19}
cm^{3} in Si at room temperature.

HW#6: Solutions
using the preferred values n_{i}=10^{10} cm^{3}
and e_{Si}=10^{12
}F/cm
are now posted and available here.

HW#7, Problem 1:
Solutions
to parts e & f are corrected in the updated version here.

HW#8, Problem 1a:
An
expanded solution to HW#8 Problem 1a is posted here.

HW#9, Problem 1b:
The
excess minority carrier distribution in the collector quasineutral region
is drawn correctly in the solutions posted here.

HW#10, Problem 1:
There was a slight error in the equation for gm, which is corrected in
the solutions posted here.

HW#12, Problem 3:
The substrate doping concentration used was incorrect; the corrected solutions
are posted here.

HW#12, Problem 4:
The substrate doping concentration solved for by iteration should have
been 5.5x10^{17} cm^{3}; the corrected solutions are posted
here.
Lecture notes:

Lecture #5, Slide
4: The label "10^{15}" should be deleted from the plot.

Lecture #6, Slide
10: The lefthand side of the equation should have the subscript
"R" rather than "G". The complete, correct equation
is shown in the posted Lecture
6 Notes.

Lecture #7, Slide
5: The right square bracket should come after the second term,
rather than the third term, in the equation. The corrected equation
is shown in the posted Lecture
7 Notes.

Lecture #14, Slide
4: The final value of the diode voltage (v_{A})
will be dictated by the circuit. This is corrected in the posted
Lecture
14 Notes.
Other:

Review Notes on pn
Junctions: At the bottom of Page 7, the signs of the exponent terms
were incorrect. The corrected notes are posted here.
Useful
Links: