- Get hands-on experience running MapReduce and gain a deeper understanding of the MapReduce paradigm.
- Become familiar with Apache Spark and get hands on experience with running Spark on a local installation.
- Learn how to apply the MapReduce paradigm to Spark by implementing certain problems/algorithms in Spark.
We highly recommend completing this lab on the Hive machines. Using your personal computer will likely require additional setup. We will not answer questions about installating the correct programs on your personal computers.
Pull the lab07 files from the lab starter repository with
$ git pull starter master
You will also be working with Spark (in Python!), so you may need to brush up a bit on your Python!
IMPORTANT: to be able to run Spark, you must create a virtual environment using the correct version of Python. This can be done as such:
$ conda create --name lab7env python=2.7
Respond to the prompt to install packages with "y" (with no quotes). You can ignore any warnings about conda being out of date. You might have to wait for a bit for these to install. Finally, run the following command to activate the virtual environment:
$ source activate lab7env
This will put you in a virtual environment needed for this lab. Please remember that if you exit the virtual environment and want to return to work on the lab, you must re-run "source activate lab7env" first for Spark to work
In lecture we've exposed you to cluster computing (in particular, the MapReduce framework), how it is set up and executed, but now it's time to get some hands-on experience running programs with a cluster computing framework!
In this lab, we will be introuducing you to a cluster computing framework called Spark. Spark was developed right here at Berkeley before being donated to the Apache Software Foundation in 2013. We will be writing Python code to run in Spark to give us some practice in writing Map and Reduce routines.
Spark has it's own website, so you are free to try to install it onto your local machines to experiment. However, it is easier to ssh into the lab computers to complete this lab.
Avoid Global Variables
When using Spark, avoid using global variables! This defeats the purpose of having multiple tasks running in parallel and creates a bottleneck when multiple tasks try to access the same global variable. As a result, most algorithms must be implemented without the use of global variables.
Documentation, and Additional Resources
- A quickstart programming guide for Spark (click the Python tab to see the Python code) is avaiable here!
- The version of Spark we will be using will be 2.0.0 and the link to the API documentation is available here (Note that the docs say version 2.3.2, but the versions are compatible).
Note: Solutions may involve reconsidering the order in which you call map(), flat_map() and reduce(). There isn't a set order to call these functions, so keep this in mind when working through these exercises.
The following exercises use three different sample input files, two of which are provided by the staff and can be found in ~cs61c/data:
- billOfRights.txt.seq -- the 10 Amendments split into separate documents (a very small input)
- complete-works-mark-twain.txt.seq -- The Complete Works of Mark Twain (a medium-sized input)
$ cp ~cs61c/data/billOfRights.txt ./
This will place a human-readable copy of billOfRights.txt file inside your current directory.
The file that our programs actually read is the version with the .seq extension. This signifies a sequence file that is readable by Spark. These are NOT human-readable. Spark supports other input formats, but you will not need to worry about that for this lab.
Although an exercise may not explicitly ask you to use it, we recommend testing your code on the billOfRights data set first in order to verify correct behavior and help you debug.
We recommend deleting output directories when you have completed the lab, so you don't run out of your 500MB of disk quota. You can do this by running:
$ make destroy-all
Please be careful with this command as it will delete all outputs generated in this lab.
Exercise 0: Generating an Input File for Spark
For this exercise you will need the Makefile and Importer.java. In this lab, we'll be working heavily with textual data. We have some pre-generated datasets as indicated above, but it's always more fun to use a dataset that you find interesting. This section of the lab will walk you through generating your own dataset using works from Project Gutenberg (a database of public-domain literary works).
Step 1: Head over to Project Gutenberg, pick a work of your choosing, and download the "Plain Text UTF-8" version into your lab directory.
Step 2: Open up the file you downloaded in your favorite text editor and insert "---END.OF.DOCUMENT---" (without the quotes) by itself on a new line wherever you want Spark to split the input file into separate (key, value) pairs. The importer we're using will assign an arbitrary key (like "doc_xyz") and the value will be the contents of our input file between two "---END.OF.DOCUMENT---" markers. You'll want to break the work into reasonably-sized chunks, but don't spend too much time on this part (chapters/sections within a single work or individual works in a body of works are good splitting points).
Step 3: Now, we're going to run our Importer to generate a .seq file that we can pass into the Spark programs we'll write. The importer is actually a MapReduce program, written using Hadoop! You can take a look at Importer.java if you want, but the implementation details aren't important for this part of the lab. You can generate your input file like so:
$ make generate-input myinput=YOUR_FILE_FROM_STEP_2.txt
Your generated .seq file can now be found in the convertedOut directory in your lab07 directory. Throughout the rest of this lab, you'll be able to run the mapreduce programs we write using make commands. The make commands will be of the form make PROGRAMNAME-INPUTSIZE. If you wish to try out the input file you generated here, you can instead run:
$ make PROGRAMNAME myinput=YOUR_SEQ_FILE_FROM_STEP_3.txt.seq # Output in wc-out-PROGRAMNAME/ directory
Exercise 1: Running Word Count
$ make sparkwc-small
This will run wordcount.py over billOfRights.txt.seq. Your output should be visible in spark-wc-out-wordcount-small/part-00000.
Next, try your code on the larger input file complete-works-mark-twain.txt.seq. One interesting feature of Spark is that it is an in-memory distributed computing engine, so it has no default file storage. Instead, we use Hadoop Distributed File System (HDFS) to help store our output. You are welcome to read more about Hadoop on your own. In general, Hadoop requires that the output directory not exist when a MapReduce job is executed, however our Makefile takes care of this by removing our old output directory.
$ make sparkwc-medium
Your output for this command will be located in the spark-wc-out-wordcount-medium directory. Search through the file for a word like "the" to get a better understanding of the output.
Exercise 2: Document Word Count
Open docwordcount.py. Notice that it currently contains code with a similar structure to wordcount.py, which you just tried for yourself. Modify it to count the number of documents containing each word rather than the number of times each word occurs in the input.
To help you with understanding the code, we have added some comments, but feel free to check out transformations and actions on the Spark website for a more detailed explanation on some of the methods that can be used in Spark.
In this part, you may find it useful to look at the transformations and actions link provided above, as there are methods that you can use to help sort an output or remove duplicate items. To help with distinguishing when a word appears in a document, you may want to make use of the document ID as well -- this is mentioned in the comments of flatMapFunc. Just because we gave you an outline doesn't mean you need to stick to it, feel free to add/remove transformations to the RDD as you see fit. You're also encouraged to rename functions to more useful titles.
Finally, make sure the output is sorted in alphabetical order. (Hint: Is there another transformation you can use?)
You can test docwordcount.py using either of the following (for our two data sets):
$ make sparkdwc-small # Output in spark-wc-out-docwordcount-small/
$ make sparkdwc-medium # Output in spark-wc-out-docwordcount-medium/
- Before running any code, make sure your output is in sorted order.
- Explain your modifications to docwordcount.py to your TA.
- Show your output for billOfRights (aka the output for running make sparkdwc-small). In particular, what values did you get for "Amendment", "the", and "arms"? Do these values make sense?
Exercise 3: Full Text Index Creation
Open index.py. Notice that the code is similar to docwordcount.py. Modify it to output every word and a list of locations (document identifier followed by the word index of EACH time that word appears in that document). Make sure your word indices start at zero. Your output should have lines that look like the following (minor line formatting details don't matter):
(word1 document1-id, word# word# ...) (word1 document2-id, word# word# ...) . . . (word2 document1-id, word# word# ...) (word2 document3-id, word# word# ...) . . .
Notice that there will be a line of output for EACH document in which that word appears and EACH word and document pair should only have ONE list of indices. Remember that you need to also keep track of the document ID as well.
For this exercise, you may not need all the functions we have provided. If a function is not used, feel free to remove the method that is trying to call it. Make sure your output for this is sorted as well.
You can test index by using either of the following commands (for our two data sets):
$ make index-small # Output in spark-wc-out-index-small/
$ make index-medium # Output in spark-wc-out-index-medium/
The output from running make index-medium will be a large file. In order to more easily look at its contents, you can use the commands cat, head, more, and grep:
$ head -25 OUTPUTFILE # view the first 25 lines of output $ cat OUTPUTFILE | more # scroll through output one screen at a time (use Space) $ cat OUTPUTFILE | grep the # output only lines containing 'the' (case-sensitive)
Make sure to verify your output. Open complete-works-mark-twain.txt and pick a few words. Manually count a few of their word indices and make sure they all appear in your output file.
- Before running any code, make sure your output is in sorted order.
- Explain your code in index.py to your TA.
- Show your TA the first page of your output for the word "Mark" in complete-works-mark-twain.txt.seq to verify correct output. You can do this by running:
cat wc-out-index-medium/part-00000 | grep Mark | less
- Answer one clicker question from lecture given by your TA. This will cover content from the past W, F, M Lectures 10/03-10/08.